DPB-350C Model Servo Flat Plate Automatic Blister Packing Machine
- Place of Origin:
- Zhejiang, China
 |
 |
Note: Machine Appearance will be changed as per different dispose!
Main Features
1. Main drive part adopts Germany imported Siemens motor, chian drive splined shaft, diameter up to 64mm, steady, large torque, longer life.
2. Human Interface Operate, PLC control, stepless frequency speed regulation.
Servo motor dragging, adjustable stroke within 40-200mm.
4. Adopt photocell device, make blister sheet more beautiful.
5. PVC and Alu Foil transportation adopt sensor switch control, motor transport, synchronization accuracy, material convey steady.
6. Adopt separate structure, easy to enter into clean workshop or through good ladder to enter into building workshop.
7. Different feeder type as per different products.
Main Technical Parameters
|
Item |
Unit |
Parameter |
|
|
Cutting speed |
times/min |
6-35 |
|
|
Power:3phases 4wires |
|
380V/50Hz |
|
|
Adjustable stroke |
mm |
40-200 |
|
|
Max. forming area |
mm×mm |
340×190 |
|
|
Max. forming depth |
mm |
AL/PL 26 |
|
|
Forming upper heat power |
kW |
2.5 |
|
|
Forming lower heat power |
kW |
2.5 |
|
|
Heat-sealing heat power |
kW |
3 |
|
|
Motor Power |
kW |
2.2 |
|
|
Air pump pressure |
MPa |
0.５-0.6 |
|
|
Air pump volume flux |
m3/min |
≥0.36 |
|
|
Packing material （H×W） |
Medicine PVC |
mm×mm |
0.25-0.40×350 |
|
|
PTP |
mm×mm |
0.02×350 |
|
Machine Dimension（L×W×H） |
mm×mm×mm |
4000×850×1750 |
|
|
Weight |
kg |
2000 |
|
Machine Picture
|
Forming Station |
Working Table |
Traction and Cutter Station |
|
Automatic Feeder |
Touch Screen |
Heat-Seal Station |
